Creality Ender-5 Plus PEI Magnetic Flexible Heated Bed, 3D Printer PEI Printing Plate 377X370X2mm

Product Information

Bed adhesion is fine, but the surface is much grittier than what you would find on a Prusa PEI textured plate. When put together, these parts result in a robust, magnetic and heat-resistant flexible plate with very good adhesion. Cubic-like Frame designed: Creality Ender-5 Plus 3D Printer is the larger version of the Creality Ender-5 3d printer, with the same cubic designed, solid cube frame.

So is the guide I followed just putting in the calibrated build volume in the spot on cura for actual build plate size which is costing me more space than it needs to? I like the finish you get on the side-down face of the glass sheet so while it’s not always possible I do consider it during setup. This is my 3rd printer and my second Creality I have been wanting one of these ever since they came out and finally pulled the trigger on it. Mine has some factory worker's fingerprints permanently embedded into the PEI sheet, where they were manually holding the plate. This ultra-large format opens up a world of possibilities, allowing you to bring your grandest ideas to reality.Ran into issues with directions on how to level and set the Z height which wasnt very clear but managed to adjust properly to a plain piece of paper. By rejecting non-essential cookies, Reddit may still use certain cookies to ensure the proper functionality of our platform. Reddit and its partners use cookies and similar technologies to provide you with a better experience. You really have to do your homework and learn things such as nozzle maintenance, E-Steps, PID tuning. As for the product, when correctly installed and configured (according to the notes above), it is a five star product, I am extremely happy with it.

at first had problems to connect via USB, CH340 driver received with printer on flash did not worked. Eventually I did some upgrades such as building my own enclosure, adding a capricorn bowden tube, and all metal extruder.My printer bed make loud screeching noises when moving up and down despite having greased the screws. By accepting all cookies, you agree to our use of cookies to deliver and maintain our services and site, improve the quality of Reddit, personalize Reddit content and advertising, and measure the effectiveness of advertising. Everything sticks so much better to this build plate than to the Carborundum one that came with the printer, even with no glue stick or anything. But, unlike with a glass surface, since the metal bed is slightly concave, so will the magnetic adhesive, and the PEI sheet be. My other printer has a PEI spring steel that I like because it’s easy and sometimes that texture on the print is beneficial.

I would also recommend going on thingiverse and printing all the "Strain Relief" models for the printer wire loom and hotbed. The heat-resistant glass platform provides excellent adhesion and heat distribution, ensuring optimal print bed conditions for consistent and reliable results. My first print came out great except the bowden tube popped out and I had to figure out how to make sure it was connected firmly.

Resume printing Function: Creality Ender-5 Plus 3D Printer resume printing while power-off, the motherboard is fully upgraded and supports continuous power failure, which effectively reduces model scrapping caused by power outages. Discover the freedom to create larger-scale models and projects with the Ender-5 Plus's generous printing space of 350x350x400mm.