Probably the best known way of draught proofing a front door – and a very effective one too –is to use self-adhesive weatherproof strips.

When it comes to loft hatches, some are better draught proofed and insulated than others. Making sure you buy the right one when installing is the best place to start, with an insulation drop down door and catch points around the perimeter of the frame to prevent air leakage. You’re getting all the tools and supplies you need to carve not one but two beautiful comfort birds as well as a step-by-step guide. Draught-proofing costs will vary depending on how much and which areas of your home you want to draught-proof.Draught-proofing external doors can stop a lot of heat from escaping, and won’t cost you much. There are four main areas to consider draught-proofing: Yep very strange about the keyhole as it is modern pvc doors, i was looking for escutcheon but need to find one that fits my key hole type, i don't think the one above does... How to insulate your house rule number one: avoid gaping gaps to outside. As you might expect from a hole leading to the exterior, the keyhole in your front door can be a pesky cause of draughts. For this reason, it really does pay to cover it up. I like this product, it works well, and is properly made. However, more detailed instructions should be supplied. Make sure the strip is the right size to fill the gap in your window. If the strip is too big, it will get crushed and you may not be able to close the window. If it’s too small, there will still be a gap.

You can fill small gaps around pipework with silicone fillers, similar to the fillers used for skirting boards and floorboards. Fill larger gaps with expanding polyurethane foam. This is sprayed into the gap, expands as it dries, and sets hard. We have more information about insulating tanks, pipework and radiators. Draught-free homes are comfortable at lower temperatures – so you may be able to turn down your thermostat, saving even more on your energy bills.The difference between draughts and ventilation is one of control. Draughts are uncontrolled, while ventilation is ours to switch on and off at will. Home ventilation in the form of extractor fans and cooker hoods will ensure that condensation is properly dealt with, at source. Ive bought it brand new. I think my warranty is up on most items like plumbing and that but i know there is a 10 year warranty on the house itself as ive had damp patches fixed by builder and no charge and he is quite decent... The bottom edges of front doors can be real hotspots (or should that be cold spots?) for draughts. For this reason, fitting brush strips or hinged flap draught excluders to this section of the door is highly recommended. Draught proofing a front door should be high on your to-do list this winter —plus, it could lower your energy bills. Here's how it's done