Repeat this step for the cables from the tail lights, twisting/winding them around each other. We should now have 2 groups of cables. One of LEGO®'s most popular product lines can now be brought to life with our custom LED lighting system. Browse our catalogue of Star Wars designed light kits, which include Ultimate Collector Series (UCS) sets and LED lightsabers for minifigures! LEGO® Modular Building Series Before reconnecting the white Lego pieces which make up the front bonnet, ensure that the cables from the LEDs are laid in between the studs of the Lego plates underneath as per below example images. Locate 2 of the provided grey plates with clips as we will be replacing the original ones with these. Take another 2 flashing Bit Lights and install them by placing them over the studs and connecting the blue transparent round pieces over the top. We will now install flasing LEDs to the blue spot lights at the front. Remove the grey plates with clips from the pole and then disconnect the round blue pieces from them.

Before dive into the KIT itself I have to remark, that the customer service was just fantastic before buying the KIT. I had some doubts and questions but they were just provided one of the best support online.Take another expansion board ( expansion board#2) and connect the first group of 6 lights from the front section of the roof to the first available ports on the expansion board.

Take the 5cm connecting cable from the kit and connect it to the last available port on expansion board#2. Connect the cables from the tail lights into one of the 12-port expansion boards ( expansion board#1) by first winding them around the board before connecting them into the first 2 available ports. We are winding them around the board so that we don’t have too much excess cabling to have to hide later on. Follow LeLightGo step-by-step instruction to light up your Ghostbusters ECTO-1, something amazing will happen at night. All our kits are plug and play - no electronics knowledge needed! Reconnect the 2×6 plate to the rest of the roof, without the white plate underneath. Then remove the red light with white stud underneath so we can install another flashing Bit Light to it.

LEGO® Ideas

Reconnect the transparent blue triangular plates we removed earlier on top of the additional plates we just installed. The LEGO Ghostbusters Ecto 1 (21108) is a faithful recreation of the iconic vehicle from the hit 80s movie franchise, Ghostbusters! To ensure a trouble-free installation of your light kit, please read and follow each step carefully.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light. Connecting cable connectors to Expansion BoardsIf you want to control the lights and get a special sound kit, then it's best to get the Standard RC + Sound Version. However, both Standard RC + Sound, Standard Remote and Standard versions are a wonder to behold at the same time as they come with the same lights. ABOUT INSTALLATION To find a lighting kit for your LEGO® set, simply scroll and browse below to find the appropriate light up kit. You can also use the search function above and type in the model name or number to find your set. Authentic Cadillac ambulance engine sound that loops until you stop it. Includes unique start and stop sounds, and even a great"engine stall" sound that will be triggered 40% of the time when you start the engine. PLEASE NOTE: THIS SET IS A LED LIGHTING KIT ONLY. LEGO® SETS ARE NOT INCLUDED. STANDARD RC + SOUND VS STANDARD REMOTE VS STANDARD

Remove the following pieces from the 2×6 plate and then connect one of the provided grey 1×2 Lego plates on each side as per below. Take 1 flashing Bit light and place it on top of the grey stud closest to the outside of the plate ensuring the LED component part is facing the correct way up. Secure this in place by connecting one of the provided transparent blue 1×2 plates over the top. Repeat this for the light on the other side ensuring the LED is installed to the stud closest to the outside and the LED component is facing the correct way up. PLEASE NOTE: THIS IS ONLY LeLightGo LEGO LIGHTS. LEGO® SET IS NOT INCLUDED. ABOUT WARRANTY & SERVICE This kit has not one, but two sound modules, and together these modules can play four sounds at the same time. This provides the most realistic sound possible, including:Take another standard Bit Light (non flashing) and install it with the LED component part facing down (as it wont connect with it facing up). Secure this into place by connecting another transparent blue plate (which we have provided) over the top. Ensure the LED component part is facing down or inward Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be inserted only one way. With the expansion board facing up, look for the soldered “=” symbol on the left side of the port. The connector side with the wires exposed should be facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily into a port connector, do not force it. Take 1 standard Bit Light (non flashing) and place it on top of the stud of the grey round plate ensuring the LED component part is facing the correct way up. Secure the LED in place by connecting the transparent Lego plate over the top.