Joined in 2023 
82 
63 About this deal
Pour a fine stream of lead directly into the cavity gate. Do not flood the sprue or fail to pour directly into the gate. When casting larger leads for boat fishing the mould may become too hot after a dozen or so pours, causing the temporary gaping along the seems and the lead to spill straight through the edges. When this happens, let the mould cool in the air. Don’t be tempted to use water to cool the mould or the leads. Beginners who are new to casting & melting can start with this lead melting hot pot. Moreover, it’s an updated version of the previous one. Hot pot 2 melts lead and pours it very smartly. As it runs from the electricity, you don’t need an additional burner. When it comes to heating, different metals need different heating. Lead doesn’t melt below this temperature. But if you want a multi-purpose pot, then you can Lee Production Pot IV. As it provides 900 F heats, you can melt Zinc, Cadmium & Bismuth. But for this purpose, a melting pot with 621 °F capacity is good enough. Industrial casting uses electricity or boilers to cast any metal fast. But for bullet casting, users tend to use burners or some switch to electric casting pots.
China (People’s Republic other than the Special Administrative Regions) (arms embargo and transit control) Times have changed, and technology has updated, and so did the melting pot. Traditionally to use bullet casting pots, users need to put a burn or any kind of heater to heat the metal. Natural fire can be effective, but it can be harmful as you can’t control the temperature. Instead, the lead will become unusable, ultimately wasting energy. Using a burner or electric mixer is more of a sustainable choice. Lee Lead Melting Pot 90949 is an excellent traditional pot where Do-It Molds Electric Lead Melting Pot 2 is a tough competitor. Electric mixing pots are controllable, but you’ll always need a power circuit to run them.Melting metal traditionally with a burner can be time-consuming. Although it has benefits of its own, not everyone might prefer it. So, Do-It Molds Hot Pot-2 is a great affordable option as an electric melting pot. Moreover, it is an improved version of Pot 1. Always read the manual attached to a pot, even if you are an expert or have no knowledge. Pots are different and need different carrying techniques. So, don’t throw the manual away and learn about every part of using the pot ideally. Know your material before you jump to melt.
Another furnace to look out for is the Rcbs lead melting pot. Now it might not be as up to Lee Precision 90949 Magnum Melter, but it does an excellent job of mixing. Let’s look into its features more to understand its best qualities below. Mould/moulds aside, you will need stainless grip lead wires, rollers or beads, loops and long/short tail wires.
Everything Else
Rcbs has a capacity of ten pounds for melting any kind of metal. But for mold making or lube products, you need to be more careful. Create different precision bullets for adaptable blending and heavy mixing. We would say it’s more suitable for ammunition. Did you know RCBS has had a reputation for reloading ammo since 1947? Make sure the door to the workspace is wide open, and also open window if possible to create an atmosphere-purging through-draft. If possible set up an old vent-axia extractor to take the fumes away from the working area. In addition to wearing suitable clothing that covers your arms and legs always wear protective glasses when working with lead. Also, never eat or drink when handling lead, and always wash your hands thoroughly. Basic equipment
Great Deal 
New Comment