Ergonomic Inclined Handles support a natural wrist position, reduce strain, and increase control when routing with arms outstretched A large base opening should have the facility to mount a reduction plate so standard guide bushes can be fitted for template operations. Extra-Wide 75mm Base Aperture to accommodate over-size cutters, such as panel raisers, when used with a Router Table. The plastic sub-base should be replaceable as it will inevitably wear or chip, and as it is the datum of the whole routing process, it must be in good condition at all times. The motor collar is normally a standard size of 43 mm to allow for this. Although being lower on power there is a definite place for these routers in the workshop.

Integrated Router Rest provides users with a safe way of changing cutters whilst preventing debris from entering motor vents.

On a plunge router it is essential to have a depth stop that can be preset for your maximum cut. On cheaper routers this is just a simple rod with a crude graduated scale. Although these are effective, care should be taken with the scale, as it can bear no relation to the amount of cutter projection.

Top-Mount Cyclone Extraction will efficiently clear debris to allow 360° visibility and prevent extraction hoses from ‘snagging’

Router classification

Once again, every manufacturer seems to have their own system for this but Trend have developed their own base configuration, (TBC) which other manufacturers now seem to be adopting. Trend is always developing new and innovative time saving solutions for our tradespeople throughout the world.

Lead-On Starter Pin for safe templating and curved work with bearing guided cutters and is stored on the fence for safe keeping. Integrated Power Trigger bult into the inclined handle for precise and safe control of the router’s on/off function. The standard and quality of manufacture, and the price paid, will be reflected in the efficiency with which the router can utilise the input power, and how much is wasted in transmission. The price will also reflect the quality and precision of standard accessories such as side fences and fine height adjusters supplied with the tool as well as the tool itself. Micrometer Fine Height Adjuster features 0.1mm increments and an easy-to-read display for precision depth adjustment.

Features and controls

To maximise the potential of the router, we offer a range of accessories for the professional user and craftsperson. in-1 Plunge and Router Table Height Adjuster can be used both above and below router or both table and hand-held mode with each 360° turn giving 1.0mm adjustment They should only ever be used with cutters up to a maximum of 30 mm diameter, but then only for light cuts. Their small size makes them very easy to control for intricate trimming jobs, particularly if they can be guided using grips on the router base. Over the years, many users – both trade and woodworkers – have come to know and respect Trend’s iconic T10 and T11 1⁄2in routers, and these have become the benchmark against which others are measured. As a result, The T12 and T14 – which will replace the T10 and T11 – have some big shoes to fill. But how do you make the best even better? Trend’s solution is to retain and improve everything that made the T10 and T11 great, while adding a host of brand-new features.