With this customization, you can achieve the your prefer position and angle, ensuring recording experience. The free Innovv app – available for Android and iOS – is easy to set up and pairs quickly with the device for a live view (helpful when setting up), to access files that you can watch or download, and to adjust the settings. I’ve turned off G-force recordings as they were filling my card up too quickly, going off over even fairly minor bumps in the road in the low settings, or even when rolling quickly off the throttle, which also makes it harder to find clips you’re looking for in the loops.

Now that the innovative INNOVV K5 4K UltraHD system is well and truly launched, the INNOVV K3 Dual Channel Action Cam system becomes the second in a series of (planned) releases reflecting a new design, performance standards, and quality approach. You can also playback your footage on your desktop or laptop with the free Thinkware Viewer with location, time and GPS data so you're always in the know. Compared to the INNOVV K3 that only covers 120 degrees, the front and rear cameras of this Thinkwareeach have a 140-degree viewing angle, giving you a total of 280-degree coverage of the road. Gold Angle lens boasts an impressive 120-degree wide-angle view, capturing every precious moment of your ride with stunning clarity.

Fitting is about a 2 hour job, although at least half of that was figuring out where I was going to route wires on my specific bike. dashcams usually have an extra interior camera and 4CH dashcams can record all around the car (or usually truck). INNOVV dash cams are always praised for their simple and rugged yet stylish design, and so does the INNOVV K3. The K3 dash cam is a product of INNOVV, a brand that has been manufacturing motorcycle surveillance systems since 2013.

Unfortunately, these can’t be changed, so the poor image quality is something that you have to deal with for a long time - if the K3 lasts. The new firmware should now be loaded; always verify this via the Settings/System section under the INNOVV App. The external main module (DVR) is placed separately on the bike and connected to the camera with 2 meter (front) and 1. Note – some settings are dynamic (the wheel spins and the system updates immediately) whereas other changes do not take effect until the camera is restarted, usually identified by a pop-up message. And although a micro-USB interface sits to the left of the media card storage slot and this interface is supposed to be used for data transfer purposes, making a connection to it using a low or high-speed USB interface is seldom successful, and if the connection is recognized it drops after a few seconds or cycles on/off – not usable.Ordinary 1CH (1 Channel) dashcams only record the front of the car while 2CH dashcams come with a rear camera. Image stabilization of some kind would be a real bonus and a great thing for INNOVV to implement; which we hope it is being worked on. Parking – if the power and SW ACC leads are connected properly, if the motorcycle is stationary and not running, and if the Parking Mode feature is ‘ON’ under the Settings/Advanced Settings with a median setting along the G-Sensor sliding scale done, any motion or force falling within the sensitivity parameters activates the system with ten (10) seconds of front/back video recorded and saved to the Parking Video folder. The default audio setting is: Off or 20/40/60/80/100% steps and having this one external microphone allowing tailored positioning is indeed better than the internal/external layout of the original K2. Fitting it to the bike took me about 1hr 30min and wiring it up is fool proof as each connection can only fit into another specific connection.