Bussmann 80 Amp House Service Cut-Out Fuse Link

Product Information

DEUTSCH DTP Series connectors are the solution for your power application requirements and can be used in harsh environment applications where even a small degradation in connection may be critical. Please check carefully that the wiring is capable of the intended load, and that the fuse is capable of protecting the wiring. DEUTSCH DT housings are available in 2, 3, 4, 6, 8, and 12 pin counts and use size 16 DEUTSCH contacts, each with 13-amp continuous capacity. DEUTSCH DTP connectors are available in 2 and 4 pin counts and use size 12 DEUTSCH contacts, each with 25-amp continuous capacity within a single housing.

Some properties have an isolation switch, which is the joint responsibility of the property owner and the electricity supplier. Someone had hacked out the metal backbox with something like a hatchet and the sharp edges had been cutting into the insulation. Even though I've not had chance to install it yet, the build quality looks good so I'm confident it will do the job. Given we will all, mostly, change cars over night this isn’t really any problem but it’s surprising how high draw can potentially be. Thermoplastic housings offer a wide operating temperature range and silicone rear wire and interface seals allow the connectors to withstand conditions of extreme temperature and moisture.You'll probably be OK with the 60A (look in the Regs fuse curves graphs to see how long you have to pull 60A for it to go! DTHD connectors are available in three sizes, carry 25 to 100 amps, and can be mounted or used in-line.

The HD/HDP is a cylindrical, multi-pin, sealed device utilizing crimp type contacts that are quickly and easily inserted or removed.Other features include: silicone wire and interfacial seals, visual indication of lock and mated position. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). f. However to cater for increasing fault levels all Lawson house service cut-out fuse-links have been ASTA tested to 80kA at 0. It was all still working on the old wylex re-wireable board, the 30a fusewire didn`t blow but the 60a 1361 did. If you’re unsure on which fuse size you need, please speak to a qualified electrician who will be able to help you.

Lawson Type MF fuse-links are for use in single or three-phase house service cut-outs or similar installations.It was all quite efficient with the DNO (Northern PowerGrid), about 2 weeks from request through to site survey and then install.