Evolution Mitre Saws help you make accurate, repeatable angled cuts in wood, metal, and plastics using their superior multi-material cutting technology. To make the cuts easier, set cutter and fence to their precise positions, using your setting pieces, and clamp two stops to the table top tight behind the fence. At Evolution, we have several Mitre Saw Stands available, as well as special Mitre Saw bundles with the stand included.

A larger blade can handle thicker materials, while a smaller blade is more suitable for precision cuts. Dual purpose cutters which can be used for producing either a neat 90° corner joint or a joint for edge jointing boards together. A zero-clearance auxiliary fence can be made from a piece of 9mm or 12mm MDF taped to the table fence. Using a long lever with a rack and pinion mechanism, it enables you to trim off fine shavings for the most precise fit.If you are going to be moving your Mitre Saw around, using it on-site, and taking it with you to various job locations then a Mitre Saw Stand will be incredibly helpful.

This fixes the final fence position and you can now bring the fence forward to make a light first pass, then move it back a little for the second pass, and so on until the final pass is made with the fence back against the stops. Designed for both DIY users and professionals, Evolution Mitre Saws are the best choicefor speed, precision, and reliability every time. Note that very slight adjustments of your fine adjuster will affect the fit of the two pieces so proceed in small steps. A Sliding Compound Mitre Saw has the functionality of a Compound Mitre Saw but also adds in a sliding carriage that allows the saw head to traverse through a workpiece giving a greater maximum cross-cut than would usually be achievable with a none sliding saw with the same blade size.When cutting Steel, it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks - unlike alternative methods.

Remember that you have to establish new cutter and fence positions every time you use a different thickness material; so keep your successful test cuts to use as setting pieces for future jobs. At their core, mitre saws are designed to cut at an angle, allowing for a variety of cutting options. Introduction: Welcome to our blog, where we unravel the mysteries surrounding 3-star Euro cylinders. The RAGE5-S Table Saw is ideal for all construction cutting tasks, it will make light work of wood joists.A Double Bevel Mitre Saw like the Evolution R225SMS-DB+ will let you make +/- 45° angled cuts without having to flip over you workpiece. First Aid: Have a first aid kit and know how to provide basic first aid in case of accidental injuries. It takes a bit of practice to get the best results and the set-up is specific to the thickness of the material being used. All Evolution Mitre Saws have can be connected to powered dust extraction systems to help keep your workspace clean. The fences lock at 45 degrees and 90 degrees with stops on adjustable cams, so spot on accuracy can be assured every time.